Console Connection; System Connection - D-Link KVM-440 Quick Install Manual

Ps2/usb combo

Hide thumbs Also See for KVM-440:

Table of Contents

Installation:

Precautions:

• Please turn off computers and attached devices before installing the KVM Switch.

• For computers with Keyboard Power On function, please unplug the power

cords in advance. Otherwise, the switch may not work properly.

• Some older computers may require you to enable USB in BIOS to make the USB

interface work.

Console Connection:

Plug the keyboard, mouse and monitor into the console ports on the rear panel

of the KVM Switch.

Use the 4-in1 KVM combo cable to connect your computers. Refer to the figures

and instructions shown below for information about connecting the KVM to PCs.

Table of Contents

Do you have a question about the KVM-440 and is the answer not in the manual?

Kvm-450