Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for D-Link KVM-08LB
Summary of Contents for D-Link KVM-08LB
- Page 1 KVM-08LB 8 Ports Stackable KVM Switch Keyboard, Mouse, 15” LCD Panel Display...
- Page 3 Products mentioned in this manual are mentioned for identification purposes only. All names of products or services appearing in this manual are the trademarks or registered trademarks of their respective organizations and companies. © Copyright 2001 Ver. No. V 0.1 LEI-UM-KVM-08LB Date : 2001/10/17...
- Page 4 ABLE OF ONTENTS CHAPTER 1 NTRODUCTION 1.1 B EFORE YOU START 1.2 F EATURES 1.3 S PECIFICATION CHAPTER 2 NSTALLATION 2.1 P RODUCT ETAILS 2.1.1 F RONT 2.1.2 R 2.1.3 P UTTON UNCTION 2.2 H ARDWARE NSTALLATION 2.2.1 R NSTALLATION 2.2.2 C ONNECTING 2.2.3 D...
- Page 5 CHAPTER 1 Introduction Before you start Before you start to install your KVM-08LB, please make sure that you received the following materials as listed below: Item Remark 8 Ports Stackable KVM Switch KVM-08LB 1 pc. Keyboard, Mouse, 15” LCD Panel Display Power Adapter 1 pc.
- Page 6 PCs boot-up transparently and simultaneously. Daisy Chain ports allow control over as many as 64 computers through 8 banks of KVM-08LB units. Hot plug—Add PCs or remove connected PCs for maintenance without powering down the KVM Switch or PCs.
- Page 7 Analog signal, 0.7V p-p, 75 ohms, D-sub PC VGA input 15-pin Graphics mode Follow VESA standard mode, auto-detection Color depth 262,144 colors Average Luminance of White 250 cd/m Keyboard & mouse Keyboard Cherry(G84-4400) Industrial keyboard with Trackball 83 keys ORDERING INFORMATION KVM-08LB (Customer model No.)
- Page 8 CHAPTER 2 Installation Product Details 2.1.1 Front View 2.1.2 Rear View Console Port Connector KVM Port Connectors Daisy Chain Port VGA signal PS/2 keyboard VGA monitor PS/2 Keyboard Input Console Console Input PS/2 mouse PS/2 mouse Console Input...
- Page 9 LCD Power On/Off Instruction Please plug in power adapter to KVM-08LB and power on your PC, before adjusting console LCD display. Push your LCD power on switch, then you can push the menu button to see a menu display, you can depend on your enjoy pushing the upward /downward selection button to choose the brightness or adjusting the right/left of screen…etc.
- Page 10 Please follow the steps below closely and in the order as shown, Otherwise , it may cause the unpredictable behavior. Step 1 Locking the screws up to the rack Please put KVM-08LB into a 19” rack mount, then lock the screws up to the rack. Illustrated as below: Step 2 Opening KVM-08LB by key...
- Page 11 Step 3 Pulling KVM-08LB to the end for Fixing Pull KVM-08LB to the end and then you will hear a voice for lock .By doing so, KVM-08LB will be fixed. Illustrated as below: KVM-08LB OW TO SLIDE BACK TO RACK Press two sides in front part of sliders and push KVM-08LB back at the same time.
- Page 12 If using a serial mouse cable, connect one end to a DB-9 serial port on the computer, and the other end to the PC1 DB-9 serial mouse port on the rear of the KVM-08LB; If your computer has an AT type keyboard port, you will need a PS/2 to AT keyboard adapter.
- Page 13 Repeat step 1 to 2 for the remainder of the computers Step 5 Connecting KVM Power Attach the power supply to the KVM-08LB unit and plug the other end into an electrical receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep.
- Page 14 2.2.3 D AISY HAIN WITCH A Please use the attached 3 feet 3 in 1 Kit to daisy chain the KVM, first. B Use one end of 3-in-one Cable Kit to connect the daisy chain port of bank 1 and the other end for the console port (white color block) of bank 2 KVM switch.
- Page 15 Hot Plug Function KVM-08LB supports “ Hot Plug “ function. When mouse/keyboard connection has been changed from one port to the other, it is not necessary to reboot the managed PC to take the change in effect.
- Page 16 Selecting PC Through Push Buttons Current Active Bank Display Port Status Port Select Bank Select Example If you want to the third port of first bank. First, you can push once to choose Bank Select , and the Bank No will display current Active (1) Bank. Then you can push three time to Port Select ,and the Port No will display Port Status (3) Port.
- Page 17 You can conveniently command KVM-08LB by keyboard hot key entry. To send commands to KVM-08LB, the “SCROLL LOCK” key must be pressed twice within 2 seconds, then you will hear a beep for confirmation and the keyboard is in hot key mode. If you have not pressed any key in hot key mode within 2 seconds , the keyboard will back to under Operation System control state.
- Page 18 Example 1.To access a computer attached to Port 2 of the third Bank. You can press through hot key as below: within 2 seconds Scroll Lock Bank 3 Port 02 Scroll Lock =302 2. To access a computer attached from 1 Bank to 2 Bank, You can press through hot key as below: within 2 seconds Page Down...
- Page 19 OSD O PERATION ETAILS When you pop up the OSD menu window go through the hot key, you will see the following small window on your monitor. BANK: SYSTEM 01 ☼SYSTEM 02 ☼SYSTEM 03 ☼SYSTEM 04 ☼SYSTEM 05 SYSTEM 06 SYSTEM 07 ☼SYSTEM 08 The 1...
- Page 20 ☼SYSTEM 07 SYSTEM 08 OSD: SEC. CHANGE SCAN: SEC. CONSOLE ON/OFF ESC: QUIT ENTER: COMPLETE TAB: NEXT INSERT: EDIT The “OSD: 10 SEC” means that the OSD windows display or KVM system name exists 10 sec. on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 sec.
- Page 21 Q: The OSD menu does not display a “☼“ on a channel where a computer is connected and powered up. What do I do? KVM-08LB will updated “☼“ every 2 seconds. Using hot key to access the OSD menu again and it should have re-detected all the active channels.
Need help?
Do you have a question about the KVM-08LB and is the answer not in the manual?
Questions and answers