Lin"A" (Jp: 17, 18); Lin"B" (Jp: 9, 10, 38, 39) - Fujitsu FLASH-CAN-64P-350-PMC User Manual

4.8 LIN"A" (JP: 17, 18)

One LIN-transceiver can be used with UART2. (Also refer to section 4.6)
JP17 enable LIN-Transceiver A
JP18 LIN Master-mode
Jumper
JP17 (LIN enable)
JP18 (LIN Master)
Default: JP17=open, JP18=open
By default, UART2 is not used as LIN-interface.

4.9 LIN"B" (JP: 9, 10, 38, 39)

One LIN-transceiver can be used with UART8.
JP9 enable LIN-Transceiver B
JP10 LIN Master-mode
JP38, JP39 connects UART8 to the LIN-transceiver (U4, X6)
Jumper
JP9 (LIN enable)
JP10 (LIN Master)
JP38 (LIN"B"RXD)
JP39 (LIN"B"TXD)
Default: JP9=open, JP10=open, JP38=open, JP39=open
By default, UART8 is not used as LIN-interface.
© Fujitsu Microelectronics Europe GmbH
FLASH-CAN-64P-350-PMC
Chapter 4 Jumpers and Switches
Setting Description
open LIN-transceiver is disabled
closed LIN-transceiver is enabled
open LIN Slave-mode
closed LIN Master-mode
Setting Description
open LIN-transceiver is disabled
closed LIN-transceiver is enabled
open LIN Slave-mode
closed LIN Master-mode
open SIN8 is disconnected from LIN-Transceiver
closed SIN8 is connected to LIN-Transceiver
open SOT8 is disconnected from LIN-Transceiver
closed SOT8 is connected to LIN-Transceiver
- 15 - UG-960008-10