Insignia NS-SB216 Quick Setup Manual

PACKAGE CONTENTS
QUICK SETUP GUIDE
Soundbar
Mini 2.0 Soundbar
with Bluetooth
NS-SB216
Remote control
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then click Support & Service.
Enter NS-SB216 in the box under Manual, Firmware, Drivers &
Product Information, then click ►.
FEATURES
Top view
# DESCRIPTION
1
Power indicator
2
Source indicator
Back view
3
(Power) button
4
(Source) button
5 VOL +/– buttons
Remote control
6 RCA (R and L) jacks
7 OPTICAL (input) jack
8 DC IN jack
9
Mounting points
10
(Power) button
11 SOURCE buttons
12
(Mute) button
13 VOL +/– buttons
14 DSP buttons
RMC-SB216
Before using your new product, please read these instructions to prevent any damage.
CONNECTING THE SOUNDBAR
Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box, to
identify your audio OUT ports. Choose one connection option below that fits your audio source.
You can connect several devices and switch the sound source as required.
Quick Setup Guide
Note: Turn off all devices while you are making connections.
AUDIO QUALITY
BEST
AC adapter 3.5 mm to RCA audio cable
RCA adapter GOOD
GOOD
- PICK ONE -
Digital connections (BEST)
FUNCTION
1 Connect one end of the digital optical cable (not included)
• Lights red when the soundbar is in standby mode.
to the OPTICAL jack on your soundbar.
• Blinks red when the soundbar is muted.
2 Connect the other end into the digital optical output port
• Turns off when the power is on.
on your audio source device.
• Green: Optical source
• Orange: RCA source 3 Change the device's audio output to 'PCM' format (typically
• Blue: Bluetooth source (blinks when in pairing mode)
found in audio settings). Refer to the documentation that
• Purple: DSP selected (on remote)
came with your audio source device for more information.
• Flashes: when adjusting volume. Turns solid when the maximum or
minimum sound level is reached.
Press to turn on the soundbar. Press again to put the soundbar into
standby mode.
Press repeatedly to cycle through the available sound sources:
• Optical - OR -
• RCA
• Bluetooth
RCA connection (GOOD)
Press to increase or decrease the volume of the soundbar.
1 Connect one end of the RCA audio cable to the RCA ports
If your TV (or other audio source device) has RCA out jacks, connect the
on your soundbar.
RCA cables to your source device and these jacks.
2 Connect the other end into the RCA audio OUTPUT ports
If your TV (or other audio source device) has an optical out jack, connect
a digital optical cable (not included) to your source device and this jack. on your audio source device.
Connect the AC adapter to this jack to power the soundbar. Note: Make sure that the cable ends match the color of the
ports.
M4 threaded inserts for mounting.
Press to turn on the soundbar. Press again to put the soundbar into
standby mode.
Press to select the sound source. Select Optical, RCA, or Bluetooth.
Press to mute the sound from the soundbar. Press again to restore the
sound.
- OR -
Press to increase or decrease the volume of the soundbar.
Press to select the Digital Signal Processor (DSP) sound mode:
3.5 mm connection (GOOD)
• Standard: Lets you enjoy normal sound.
1 Connect one end of the RCA audio cable connectors
• Theater: Best for enjoying movies. Bass frequencies are enhanced.
to your soundbar, then connect the other end to the
• News: Select for clear voice reproduction.
3.5 mm to RCA adapter (included).
2 Connect the other end of the adapter to the
headphone or AUX Output on your audio source
device.
JACK TYPE (on source device) CABLE
Digital optical cable (not included)
RCA audio cable (included)
3.5 mm audio cable (adapter included)
TV or DVD/Blu-ray
Back of the soundbar
Digital optical cable
(not included)
Back of the soundbar TV or DVD/Blu-ray player
RCA audio cable (included)
TV or
3.5mm to RCA adapter
DVD/Blu-ray
(included)
player
Back of the
soundbar
RCA audio cable (included)
CONNECTING THE AC ADAPTER
Cautions:
• Make sure that the electrical outlet matches the AC adapter's input requirements of 100-240 V, 50/60 Hz before
connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections have been made.
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
2 Plug the other end of the AC adapter into a power outlet or surge protector.
Back of the soundbar
player
CONNECTING YOUR SOUNDBAR USING BLUETOOTH OPTIONAL
Pairing your devices
1 Turn on your soundbar.
2 Place your Bluetooth device within 30 ft. (10 m) of your soundbar.
3 Press the (Bluetooth) button on the remote control or the
select Bluetooth mode. The LED blinks blue.
4 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For
additional information on pairing your device, refer to your devices' documentation.
5 On your Bluetooth device, select "NS-SB216" from the device list. Repeat steps 1-4 if "NS-SB216" is not
displayed.
6 If a PIN code is requested, enter "0000."
7 When pairing is completed the LED lights solid blue.
Notes:
• Some devices, such as an iPhone, connect immediately after pairing so the Bluetooth indicator on your
soundbar remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this
instance, the Bluetooth indicator continues to blink until a connection is established.
• Your soundbar saves pairing information for up to eight devices. However, it can only be connected and play
content from one device at a time.
• When you turn on your soundbar, it automatically connects to the last connected device if that device is in
range. To connect to a different paired device, turn off Bluetooth or unpair from the currently paired device
and manually connect to the other paired device.
Disconnecting your devices
• Turn off the Bluetooth function on your device.
Note: For more information about using Bluetooth, see the online User Guide.
AC wall plug
AC adapter
(source) button on the soundbar to
OVER