Setting Up Dvd Dolby Digital - Insignia NS-LTDVD19-09CA User Manual

08-1154 NS-LTDVD19-09CA - ENG.fm Page 26 Monday, April 28, 2008 10:03 AM
/
2 Press to select the Audio icon
then press ENTER. The Audio Setup Page
opens.
/
3 Press to highlight Speaker Setup, then
press ENTER. The Speaker Setup Page
opens.
4 Press / to highlight DOWNMIX, then
press ENTER.
5 Press / to highlight LT/RT or STEREO,
then press ENTER.
• LT/RT-On a disc recorded with a
multichannel soundtrack, the output signal
will be incorporated into the left and right
channel.
• STEREO-On a disc recorded with a
multichannel soundtrack, the output signal
will be incorporated into stereo.
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press
Exit icon, then press ENTER.

Setting up DVD Dolby Digital

To set up Dolby Digital:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY WIDE
CAPTIONS OFF
SCREEN SAVER ON
LAST MEMORY ON
GOTO GENERAL SETUP PAGE
26
Insignia NS-LTDVD19-09CA 19" LCD TV/DVD Combo
, 2 Press
then press ENTER. The Audio Setup Page
opens.
3 Press
SETUP, then press ENTER. The Dolby
Digital Setup Page opens.
4 Press
D.R.C, then press ENTER.
•
•
to highlight the
5 Press
MONO, RIGHT MONO, or MIXED MONO,
then press ENTER.
6 Press
ENTER.
7 Press
previous menu.
8 To close the menu, press
Exit icon, then press ENTER.
www.insignia-products.com
/
to select the Audio icon
/ to highlight DOLBY DIGITAL
/ to highlight DUAL MONO or
DUAL MONO-This is the output mode for
the left and right signals of the selected
audio output. If it is set to MIXED MONO,
the function only works when the DVD
uses 5.1-channel sound.
D.R.C-Select to adjust the linear
compression rate to obtain different
compression results for the signals.
/ to highlight STEREO, LEFT
/
to change the setting, then press
one or more times to go back to the
to highlight the
,