Refrigerant Filling Capacity; Notes; Important Safety Notes - Mercedes-Benz SLS AMG Operator's Manual

Refrigerant instruction label
Example: refrigerant instruction label
Warning symbol
:

Refrigerant filling capacity

;
Applicable SAE standards
=
PAG oil part number
?
Type of refrigerant
A
Warning symbols : indicate:
possible dangers
R
having service work carried out at a quali-
R
fied specialist workshop
Filling capacities
Missing values were not available at time of
going to print.
All models
Refrigerant
PAG oil
Brake fluid
G WARNING
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point of the brake
fluid is too low, vapor pockets may form in the
brake system when the brakes are applied
hard. This would impair braking efficiency.
There is a risk of an accident.
Service products and filling capacities
You should have the brake fluid renewed at
the specified intervals.
When handling brake fluid, observe the
important safety notes on service products
(
Y
The brake fluid change intervals can be found
in the Maintenance Booklet.
Only use brake fluid approved by Mercedes-
Benz according to MB Approval 331.0.
Information about approved brake fluid can
be obtained at any qualified specialist work-
shop or on the Internet at
http://bevo.mercedes-benz.com.
i
Coolant

Important safety notes

! Only add coolant that has been premixed
Capacity
28.2 oz
(800 g)
! Always use a suitable coolant mixture,
i
Comply with the important safety precautions
for service products when handling coolant
(
Y
page 281).
Have the brake fluid regularly replaced at
a qualified specialist workshop and the
replacement confirmed in the Maintenance
Booklet.
with the desired antifreeze protection. You
could otherwise damage the engine.
Further information on coolants can be
found in the Mercedes-Benz Specifications
for Service Products, MB BeVo 310.1, e.g.
on the Internet at
http://bevo.mercedes-benz.com. Or con-
tact a qualified specialist workshop.
even in countries where high temperatures
prevail.
Otherwise, the cooling system is not suffi-
ciently protected from corrosion and over-
heating.
Have the coolant regularly replaced at a
qualified specialist workshop and the
replacement confirmed in the Maintenance
Booklet.
page 281).
285
Z