Mercedes-Benz SLS AMG Operator's Manual page 238

Flat tire
236
Do not remove any foreign objects which
X
have penetrated the tire, e.g. screws or
nails.
Take the TIREFIT kit out of the trunk
X
( page 234).
Y
Open the TIREFIT kit and remove "max.
X
80 km/h" sticker D.
Affix sticker D within the driver's field of
X
vision.
i
If TIREFIT leaks out, allow it to dry. It can
then be removed like a layer of film.
If you get TIREFIT on your clothing, have it
cleaned as soon as possible with perchloro-
ethylene.
Comply with the manufacturer's safety
instructions on the tire inflation compressor
label and on the tire sealant bottle.
i
You will also find operating instructions
= in the lid of the TIREFIT kit.
Pull the cable and filler hose E out of the
X
housing.
Unscrew flanged cap A.
X
Unscrew the cap from tire sealant bot-
X
tle :. Make sure that the aluminum film is
not damaged when doing so.
Screw tire sealant bottle : clockwise
X
tightly onto flange seal F.
This pierces the aluminum film.
Remove the cap from the valve on the faulty
X
tire.
Make sure that pressure release screw C
X
is closed.
Remove the dust protection cap from filler
X
hose E.
Screw the end of filler hose E onto tire
X
valve G.
Make sure that on/off switch ; on the tire
X
inflation compressor is set to 0.
Insert connector ? into the 12 V socket
X
( page 203).
Y
Select key position 2 with the Start/Stop
X
button ( page 119).
Y
i
The battery discharges during tire infla-
tion compressor usage. For this reason,