Mercedes-Benz SLS AMG Operator's Manual page 210

Features
208
If a cellular phone network is available and
there is sufficient GPS reception, the mbrace
system transmits data to the Mercedes-Benz
Customer Assistance Center, for example:
Current location of the vehicle
R
Vehicle identification number
R
i
The COMAND display shows that an
mbrace call is active. During the call, you
can change to the navigation menu by
pressing the NAVI button on COMAND, for
example.
Voice output is not available.
A voice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants. You can
obtain information on how to operate your
vehicle's systems, on the location of the near-
est authorized Mercedes-Benz Center, and on
further products and services offered by
Mercedes-Benz USA.
USA only: you can find further information on
the mbrace system under "Owners Online" at
http://www.mbusa.com.
i
The mbrace system failed to initiate an
MB Info call if:
the indicator lamp in MB Info call but-
R
ton : is flashing continuously.
no voice connection to the Mercedes-
R
Benz Customer Assistance Center was
established.
This may be because the corresponding
mobile phone network is not available.
The Call Failed Call Failed
multifunction display.
To end a call: press the ~ button on the
X
multifunction steering wheel.
or
Press the corresponding button for ending
X
a phone call on COMAND.
message appears in the
Call priority
When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an emer-
gency call will take priority and override all
other active calls.
The indicator lamp of the respective button
flashes until the call is ended. An emergency
call can only be terminated by the Mercedes-
Benz Customer Assistance Center.
All other calls can be ended by pressing:
the ~ button on the multifunction steer-
R
ing wheel
or the corresponding COMAND button for
R
ending a telephone call
i
If an mbrace call is initiated, audio output
is muted. The mobile phone is no longer
connected to COMAND. If you must use
your mobile phone, we recommend that
you do this only when the vehicle is sta-
tionary and in a safe location.
Downloading destinations in COMAND
Downloading destinations
i
Information on the components and oper-
ating principles of COMAND can be found
in the separate COMAND operating instruc-
tions.
This service is part of the mbrace PLUS Pack-
age and cannot be purchased separately.
i You can only use the Destination Down-
load function if the vehicle is equipped with
a navigation system.
Destination Download gives you access to a
data bank with over 15 million Points of Inter-
est (POIs). These can be downloaded on the
navigation system in your vehicle. If you know
the destination, the address can be down-
loaded. Alternatively, you can obtain the loca-
tion of Points of Interest (POIs)/important
destinations in the vicinity.
You are prompted to confirm route guidance
to the address entered.