Live View; Login - Q-See QC series User Manual

2.4 LIVE VIEW

Live View is the default mode for your DVR. It will display the video feeds from your cameras - either a
single channel, or from multiples. You do not need to be logged in to view or change channels.
Single Screen
The number of channels that can be displayed at once depends on the capacity of your DVR. For
instance, if you have a four-channel system, the viewing options will be limited to single- or four-screen
modes.
Clicking on any one screen in multi-view mode will bring that screen to full-screen single-view mode. The
exception is in eight-view where clicking on one of the smaller displays will move it to the larger display.
You can also drag channels to a different position on the screen with the displaced channel relocating to
the position of the one that was moved.

LOGIN

For your protection, the DVR will log you out after
a period of inactivity. To make any changes to your
system, or to view recorded video, you will need to
log back in. Use the mouse to select your account
from the pull-down and then to "push" the keys
on the Virtual Keyboard to enter your password.
Click Enter to submit the password and exit the
keyboard.
Until new accounts are added, there are two pre-configured accounts available to users who log into the
DVR:
• Administrator (local and network) User name: admin Password admin
• User name user Password user
The Admin account cannot be deleted, but you can - and should - change the password.
IMPORTANT!
password after you complete the setup of your system to ensure the security
of your system. Record your changes and keep that information stored
securely as the system will prevent access if the incorrect login information
is attempted three times within a 30-minute period. If you find yourself locked
out of the DVR because of this, wait 30 minutes, reboot the DVR and attempt
to log into it again.
4 Screens
9 Screens
PICTURE 2.4-1
It is highly recommended that you change your system
8 Screens
16 Screens
PICTURE 2.4-2
15