Removal And Replacement - Scotsman CS0415 Service Manual

Removal and Replacement

To remove the evaporator thermistor:
Evaporator
Thermistor
a) Remove the cutter grid from the unit
b) Disconnect the evaporator thermistor connector
from the bottom of the control housing.
c) Remove the two hex-head mounting screws
from the water trough and pull the
trough from the unit.
Reach behind the accumulator,
and unclip the evaporator
thermistor from the evaporator
tubing and remove it.
To remove the water distributor:
a) Remove the cutter grid from the unit
b) Pull out on the left and right water distributor
retainers, and remove the tabs from the slots in the
evaporator. Pull the distributor forward and remove
the water hose.
Water Distributor
July 2007
Page 20
Service Manual
Tab
Water Hose
CS0415