Quick Reference; Wall Mount; Supplied Accessories; Attaching/Detaching The Stand - Sharp Aquos LC-60LE450U Operation Manual

QUICK REFERENCE

Supplied Accessories

Make sure the following accessories are provided with the product.
Remote control unit "AAA" size battery
( X 1)
Page 9
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual
accessories.

Attaching/Detaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it
from being damaged.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV
falling over.
1. Put the TV face down on a safe surface that is covered by a soft and smooth cloth. ( Show in diagram 1)
2. Fix the TV stand support to the stand base, fasten the screws by using a cross-head screwdriver
(Not supplied).( Show in diagram 2)
3. Fix the TV stand base to the TV, fasten the screws by using a cross-head screwdriver (Not supplied).
( Show in diagram 3)
CAUTION
Do not push too hard or put excessive pressure to the stand neck to avoid the
damages when you turn the TV for the most comfortable viewing angle.
To detach the stand, perform the steps in reverse order.

Wall Mount

Use the four screws provided to fix the TV onto a wall
mounting bracket (not included) via the four VESA
standard holes on the back of the television.
VESA screw hole specs(A-B)
in millimeters
Standard screw
Quantity
Stand base(X1)
with Screws
( X 2)
Page 7
Page 11
(4 pc s screws)
3
15 / -15 /
4
(400-400)
M6 (1.0 pitch screw)
4
X6
x4
Stand Support(X1) Operation manual
with Screws
Page 7
3
4
400x400mm VESA mount
Connection guide
( (
X 1) X 1)
(6 pc s screws)
3
15 / (400mm) A
4
7