Installing Batteries In The Remote Control Unit - Sharp Aquos LC-60LE450U Operation Manual

Preparation

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1
Open the battery cover.
2
Insert two "AAA" size batteries (supplied
with the product).
Place the batteries with their terminals
corresponding to the ( ) and ( )
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the
instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries come in
contact with skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage
conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries
from it.
• The batteries (batteries installed) shall not be exposed to excessive heat such as sunshine, fire or
the like.
3
Close the battery cover.
11