Basic Navigation - Aviom A-16II User Manual

front panel.
• When a mix Preset is saved, all sixteen channel buttons will
flash briefly to confirm the Preset save operation.
S
• The
olo
indicating that the selected channel or Group is now being
auditioned with all other channels being muted. Two Solo
modes are available.
M
• The
ute
with a channel selected will cause that channel's lower
(yellow) LED to light.
There is also one special button combination, the R
by the M button. When used together this combination serves a twofold
ute
function:
• If there is a sudden change in the audio volume coming
through the monitor system, this button combination
silences all audio channels instantly.
• When starting from scratch to
tion to set all sixteen channels to zero volume and all pans
to the center settings.
P N : The text on the right side of the Personal Mixer label reads "In Recall
ote
Mode All Volumes Zero" as a reminder that this function is always
available.

Basic Navigation

When the Personal Mixer is powered up, Preset 1 is automatically selected.
On the Personal Mixer, one channel is always selected for editing. You can tell
that a channel is selected because the upper LED in its button is lit.
The sixteen channel buttons have two LEDs in each, an upper and a lower.
The red upper LED indicates that the channel is selected; you can change
its volume and panning. You can also solo or mute the channel using the
dedicated S and M
olo
The upper LEDs will also light in combination if a track is linked or is part of
one of the three available Groups. (More info on Groups appears later in this
document.)
The lower yellow LED in each channel button indicates the channel's mute
status. A lit LED indicates that the channel is muted. Any number of channels
can be muted.
A-16ii P M U G
ersonAl ixer ser
button has one LED. It will light when pressed,
button has no LED in it. Pressing the M
buttons on the Personal Mixer surface.
ute
Uide
ute
ecall
create a mix, use this func‑
button
button followed
17