Aviom A-16II User Manual page 14

Up to 500 feet of Cat-5e
cable can be used to
connect each system
component
Infinite number
of A‑Net
components
Your cable length performance will be affected by a number of factors
including the quality of the cables used, and the number of devices such as
cable couplers used or passive wall panel interconnections in use. Use Cat‑5e
cable for best performance wherever possible. Stranded or solid Cat‑5e cable
can be used.
When using the optional AN‑16SBR System Bridge, the cable length
specification applies to the total cable length between the two A‑Net devices
being connected with the AN‑16SBR System Bridge. This is similar to what
happens when using an inline coupler to extend cable lengths.
Total A-Net cable length can be 500 feet (150 meters)
Pro16 Input
A-Net Out
Total cable length calculations include cables used top connect I/O modules
to System Bridges.
Pre‑made cables in a variety of lengths and colors are available at most
A-16ii P M U G
ersonAl ixer ser
System
Bridge
Uide
AN-16/i Input Module
AN-16/o Output Modules
or Personal Mixers
System
Pro16 Output
Bridge
A-Net In
6