Basic Navigation - Aviom A-16II User Manual

Aviom user guide personal mixer a-16ii
Hide thumbs Also See for A-16II:
Table of Contents

Advertisement

• The S
• The M
There is also one special button combination, the R
by the M
UTE
function:
• If there is a sudden change in the audio volume coming
• When starting from scratch to create a mix, use this func-
Solo
12
13
14
Note: The text on the right side of the Personal Mixer label reads "In
Recall Mode All Volumes Zero" as a reminder that this function is
always available.

Basic Navigation

When the system is powered up, Preset 1 is automatically selected. On the
Personal Mixer, one Channel is always selected for editing. You can tell that
a Channel is selected because the upper LED in its button is lit.
The sixteen Channel buttons have two LEDs in each, an upper and a lower.
The red upper LED indicates that the Channel is selected; you can change
its volume and panning. You can also solo or mute the channel using the
dedicated S
The upper LEDs will also light in combination if a track is linked or is part
of one of the three available Groups. (More info on Groups appears later in
this document.)
button has one LED. It will light when pressed,
OLO
indicating that the selected Channel or Group is now being
auditioned with all other Channels being muted. Two Solo
modes are available.
button has no LED in it. Pressing the M
UTE
ton with a Channel selected will cause the Channel's lower
(yellow) LED to light.
button. When used together this combination serves a twofold
through the monitor system, this button combination
silences all audio channels instantly.
tion to set all sixteen channels to zero volume and all pans to
the center settings.
Mute
15
16
and M
buttons on the Personal Mixer surface.
OLO
UTE
In Recall
Mode All
Volumes
Zero
All Volumes Zero
Select
Mute
but-
UTE
button followed
ECALL
17

Advertisement

Table of Contents
loading

Table of Contents