Setting The Sound Focus Equalizer; Using Balance Adjustment - Pioneer AVH-P6450CD Operation Manual

Audio Adjustments

Setting the sound focus equalizer

Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
• boosts the treble on the front output and
FRT1
the bass on the rear output.
boosts the treble and the bass on the front
FRT2
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both and
FRT1 FRT2
more pronounced effect than the
1 Press on the head unit to select the
SFEQ
desired mode.
SFEQ
Press on the head unit repeatedly to
SFEQ
switch between the following sound focus
equalizer.
(front1-high) —
FRT1-H
(front2-high) —
FRT2-H
(custom) —
CUSTOM OFF
2 Press 2 or 3 to select the desired position.
Press 2 or 3 until the desired position appears
in the display.
(left) — (center) —
LEFT CENTER
Notes
• If you adjust the bass or treble,
memorizes an
SFEQ
and treble are adjusted for personal prefer-
ence.
• If you switch the
SFEQ
tion is automatically switched off. By switch-
ing the function on after selecting the
HPF
mode, you can combine
SFEQ
with function.
SFEQ
the setting provides a
H
setting.
L
(front1-low) —
FRT1-L
(front2-low) —
FRT2-L
(off)
(right)
RIGHT
CUSTOM
mode in which the bass
mode, the func-
HPF
function
HPF

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press 5 or ∞ to select
MENU, and press
A.MENU
AUDIO MENU is displayed.
2 Select (or
FAD/BAL
.
A.MENU
FADER/BALANCE adjustment indications are
displayed.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
• –
FRONT:15 REAR:15
front/rear speaker balance moves from front to
rear.
• is the proper setting when only two
FR:00
speakers are used.
• When the rear output setting is
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 51.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3,
press of 2 or 3 moves the left/right speaker
balance towards the left or the right.
• – is displayed as the left/right
LEFT:9 RIGHT:9
speaker balance moves from left to right.
from the
AUDIO
.
), and press
BAL
is displayed as the
REAR SP:S.W
is displayed. Each
LR:0
En
Section
10
,
45