Other Functions
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner’s manual.
Selecting AUX as the source
Press
to select
as the source.
SOURCE
AUX
Press
until
appears in the display.
SOURCE
AUX
• If the auxiliary setting is not switched on,
AUX
cannot be selected. For more details, see
Switching the auxiliary setting on page 51.
Setting the AUX title
The title displayed for the
source can be
AUX
changed.
1 After you have selected
as the source,
AUX
press
and the AUX SOURCE MENU is
A.MENU
displayed.
2 Press 5 or ∞ to select
, and press
AUX
.
A.MENU
AUX MENU is displayed.
3 Press 5 or ∞ to select
, and
NAME EDIT
press
.
A.MENU
NAME EDIT adjustment indications are dis-
played.
4 Press
to select the desired charac-
A.MENU
ter type.
Press
repeatedly to switch between the
A.MENU
following character type:
(Upper case),
and
—
Alphabet
Numbers
Symbols
(Lower case)
Alphabet
Section
12
5 Press 5 or ∞ to select a letter of the alpha-
bet.
Each press of 5 will display a letter of the alpha-
bet in
, numbers and symbols in
A B C ... X Y Z
1 2
order. Each press of ∞ will display a
3 ... @ # <
letter in the reverse order, such as
Z Y X ... C B A
order.
6 Press 3 to move the cursor to the next
character position.
When the letter you want is displayed, press 3
to move the cursor to the next position and then
select the next letter. Press 2 to move back-
wards in the display.
7 Move the cursor to the last position by
pressing 3 after entering the title.
When you press 3 one more time, the entered
title is stored in memory.
8 Press
to return to the playback
BAND/ESC
display.
Page 53