Setting The Sound Focus Equalizer; Using Balance Adjustment - Pioneer DEH-P5450 Operation Manual

Section
Audio Adjustments
06

Setting the sound focus equalizer

Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
• boosts the treble on the front output and
FRT1
the bass on the rear output.
boosts the treble and the bass on the front
FRT2
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both and
FRT1
a more pronounced effect than the
1 Press to select the desired
SFEQ
mode.
Press repeatedly to switch between the
SFEQ
following setting:
(front 1-high)—
FRT1-HI
low)— (front 2-high)—
FRT2-HI
2-low)—
CUSTOM
Selected mode (e.g.,
2 Press 2 or 3 to select the desired position.
Press 2 or 3 until the desired position appears
in the display.
(left)— (center)—
L C
Note
• If you adjust the bass or treble,
memorizes an
and treble are adjusted for personal prefer-
ence.
26
En
the setting provides
FRT2 HI
LOW
SFEQ
(front 1-
FRT1-LOW
FRT2-LOW
(custom)—
SFEQ OFF
) appears in the display.
F1
(right)
R
CUSTOM
mode in which the bass
SFEQ

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
Press
AUDIO
play.
• If the balance setting has been previously
adjusted,
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
setting.
speaker balance towards the front or the rear.
•
FADER :F15
front/rear speaker balance moves from front to
rear.
•
FADER : 0
speakers are used.
(front • When the rear output setting is subwoofer,
(off) you cannot adjust front/rear speaker balance.
Refer to Switching the rear output setting on
page 33.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3,
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.
•
BAL :L9
speaker balance moves from left to right.
to select
AUDIO FADER
until appears in the dis-
FADER
will be displayed.
BAL
– is displayed as the
FADER :R15
is the proper setting when only two
BAL : 0
– is displayed as the left/right
BAL :R9
.
is displayed.