Terminal Display - ASCOM Office 10 User Manual

Using Added Features to Make Efficient Phone Calls
Note
Suppressing your Call Number from Your Called Party's

Terminal Display

You do not want your call number to appear on the terminal display of a called party in the public
network.
You have two possibilities [B]:
• If you never want your call number to appear, you can ask your system administrator to set up the
system configuration accordingly.
• To suppress your call number display for certain calls only, select the function "CLIR per call" before
dialling your party's call number. You can store the function under a function key or activate it with a
*/# procedure.
The CLIR per call function is available on a function key.
Note
14
– or –
Pick up the handset.
Enter #46 for a private call. Enter your internal phone number.
Enter your PIN.
The phone is now enabled. You hear the external dialling tone.
The initialization PIN "0000" is not accepted. Obtain a new PIN from your
system administrator first.
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
Enter the external call number directly, without the exchange access digit.
The external subscriber is called.
Before the call: Press the CLIR per call function key.
Suppressing your phone number from the display only works with external
calls and has to be subscribed to with your provider.