Using The Functions; Storing The Strongest Broadcast Frequencies; Recalling Broadcast Frequencies; Tuning In To Strong Signals - Pioneer AppRadio SPH-DA110 Operation Manual

Using the radio
 Lowers frequencies in one-step incre-
ments. Holds down the key and the tuner
will scan frequencies until a broadcast
strong enough for good reception is found.
 Switches the reception level.
Ü For details, refer to Tuning in to strong
signals on page 17.
 Turns news programme interruption on
and off.
Ü For details, refer to Using news pro-
gramme interruption on page 19.
 Turns the TA (traffic announcement stand-
by) function on and off.
Ü For details, refer to Receiving traffic an-
nouncements on page 18.
 Switches the sound quality while receiving
the FM band.
Ü For details, refer to Switching the sound
quality on page 17.
- Displays the radio text (when radio text is
received).
Ü For details, refer to Displaying radio text
on page 18.
^ Stores the strongest broadcast frequen-
cies.
Ü For details, refer to Storing the strongest
broadcast frequencies on page 17.
p If you touch and hold the , , -, ^
icons, pop-up text explaining the function
of the icon is displayed.

Using the functions

Storing the strongest broadcast
frequencies
This function automatically assigns frequen-
cies with good reception to the preset chan-
nels in the selected band.
You can update six channels in each band.
p Storing broadcast frequencies may replace
broadcast frequencies you have already
saved.
p The lowest frequency is registered for
channels that could not be registered auto-
matically.
Tap .

Recalling broadcast frequencies

Tap any frequency on the preset chan-
nel keys.

Tuning in to strong signals

Local seek tuning lets you tune in to only
those radio stations with sufficiently strong
signals for good reception.
Tap or to switch the reception
level between the following levels:
FM: OFF) LEVEL1)
( (
LEVEL3)
(
MW/LW: OFF)
(
LEVEL2)
(
p The highest level setting allows reception
of only the strongest stations, while lower
levels allow the reception of weaker sta-
tions.

Switching the sound quality

You can switch the sound quality mode while
receiving the FM band.
Tap to changes the setting as follows:
• STANDARD (default):
Sets to the normal sound quality mode.
• STABLE:
Sets to the noise suppression mode
(emphasis on monaural output, etc.).
• Hi-Fi :
Sets to the high sound quality mode
(emphasis on stereophonic output, etc.).
p To enable the setting, you have to restart
[Radio] source.
LEVEL2)
(
LEVEL4)
(
LEVEL1)
(
Engb
Chapter
04
17