Pioneer AppRadio SPH-DA110 Operation Manual page 9

About AppRadio
Connect your iPhone with Lightning
connector
Using the following cable and adapter enables
you to connect your iPhone to this product.
• High Speed HDMI
®
plied)
• USB cable (supplied)
• Lightning to USB Cable (CD-IU52) (sold
separately)
• Lightning Digital AV Adapter (Apple Inc.
products) (sold separately)
Ü For connecting iPhone with Lightning con-
nector, refer to Installation Manual.
p [iPod] is disabled when an iPhone with
Lightning connector is connected. Please
use the CarMediaPlayer to play music or
videos in the AppRadio Mode.
For details about the CarMediaPlayer, refer to
the information on our website.
1 Set "App Connection Settings" to
"iPhone (Digital AV)" before connecting
your iPhone with Lightning connector.
Ü For detailed procedures, refer to Setting the
type of the mobile device to be connected on
page 48.
2 Unlock your iPhone and then connect
the iPhone to this product.
The [Apps] icon on the Home screen changes
to the active state for iPhone, and you are now
ready to view the screen image of iPhone
(App Mode).
Ü For details of the App Mode, refer to Chap-
ter 6.
3 Register your iPhone and connect it to
this product via the Bluetooth wireless
technology.
Ü For detailed procedures, refer to Registering
your Bluetooth devices on page 29.
The [Apps] icon on the Home screen changes
to the state for the AppRadio Mode, and you
are now ready to use the AppRadio Mode.
Ü For details of AppRadio Mode, refer to
Chapter 6.
Cable (Type A - A) (sup-
p When you make hands-free phoning or use
your iPhone with Lightning connector as a
Bluetooth audio device, you must make the
Bluetooth connection, but do not have to
make the wired connection. The Bluetooth
audio sound may not output sometimes
when iPhone is wired.
Disconnecting your iPhone
Pull out the iPhone cable after check-
ing that no data is being accessed, and dis-
connect Bluetooth connection.
Connect your iPhone with 30-pin
connector
Using the separately sold USB interface cable
for iPod / iPhone (CD-IU201N) enables you to
connect your iPhone to this product.
p Connection via a USB hub is not possible.
1 Set "App Connection Settings" to
"Others" before connecting your iPhone
with 30-pin connector.
Ü For detailed procedures, refer to Setting the
type of the mobile device to be connected on
page 48.
2 Unlock your iPhone and then connect
the iPhone to this product.
The [Apps] and [iPod] icons on the Home
screen change to active, and you are now
ready to use the AppRadio Mode and to play
iPod contents.
Ü For details of AppRadio Mode, refer to
Chapter 6.
Ü For detailed procedure of playing iPod con-
tents, refer to Chapter 5.
p When you make hands-free phoning or use
your iPhone with 30-pin connector as a
Bluetooth audio device, you must make the
Bluetooth connection, but do not have to
make the wired connection. The Bluetooth
audio sound may not output sometimes
when iPhone is wired.
Ü For detailed procedures, refer to Register-
ing your Bluetooth devices on page 29.
Chapter
02
9
Engb