Using Batteries: General Guidelines; Installing And/Or Replacing Batteries - Datamax PRINTPAD MC70 User Manual

Using Batteries: General Guidelines

The printer ships with two batteries installed, but

they are not operational. Before operating the
printer, remove the two red, battery isolator
labels either by gently pulling the labels out, or
by lifting the batteries up.
If you are storing your printer for a long period

of time or shipping it, reinstall the battery
isolator labels.
Both batteries must be installed for your printer

to operate properly.

Installing and/or Replacing Batteries

1. Open the printer by unsnapping the latch on the
front of the case (Figure 1).
2. Lift the battery cover up by pushing the retainer clip
inward with your finger (Figure 2).
Figure 1
3. Lift up the outside end of the battery to remove it.
PRINTPAD MC70 USER'S GUIDE
Figure 2
2