Front
Back
Bottom
8
Part Names and Functions
Speaker
Projection Lens
Lens Cap
(See page 60 for attaching.)
Do not turn on a projector with lens cap attached.
High temperature from light beam may damage
lens cap and result in fire hazard.
Lamp Cover
Power Cord Connector
Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
Filter
Note:
LAN Connection Terminal is for the Network
function. Refer to the owner's manual of "Network
Set-up and Operation" .
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Kensington is a registered trademark of ACCO
Brands Corporation.