Sanyo PLC-XK2200 Owner's Manual page 57

The Information Menu is used for checking the status of the image signal being projected and the operation of the
projector.
Direct Operation
Press the INFO. button on the remote control to display
the Information Menu.
Menu Operation
Press the Point buttons to select the Information.
The Information Menu is displayed.
See below for displayed information.
The selected input source is displayed.
The horizontal frequency of the input signal is
displayed in , or - - - -
The vertical frequency of the input signal is displayed
in , or when no signal. Numbers of Hz
doubles when during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
, or
The selected Key lock icon is displayed.
or On1 or On2 is displayed.
The selected remote code is displayed.
The serial number of the projector is displayed. The
serial number is used to service the projector.
when no signal.
, and are displayed.
57