Sanyo PLC-XK2200 Owner's Manual page 28

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If
a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a
proper image without any additional settings. (Signal formats provided in this projector are shown on page 70.)
One of the following messages may appear when:
When the projector cannot recognize
the connected signal conforming to the
provided PC systems,
on the System Menu box and the Auto
PC Adjustment function works to display
proper images. If the image is not projected
properly, a manual adjustment is required
(pp. 30-31).
There is no signal input from the
-----
computer. Check the connection between
your computer and the projector. (See
"Troubleshooting" on p. 63.)
The preset system is manually adjusted in
Mode 1
the PC adjust Menu. The adjusted data can
be stored in
PC Systems provided in this projector is
chosen. The projector chooses a proper
system provided in the projector and displays
it.
*Mode 1 and
Selecting Computer System Manually
PC system can also be selected manually.
1 Press the MENU button to display the On-Screen
and then press the Point
2
then press the Point
3
system and then press the SELECT button.
28
is displayed
(pp. 30-31).
are examples.
or the SELECT button.
and
or the SELECT button.
Selected system in the
PC System Menu is
displayed.
Customized Mode
set in the PC
adjust Menu (pp.
30-31).
Systems in this dialog box
can be selected.