Sanyo PLC-XK2200 Owner's Manual page 36

Direct Operation
Choose Video or S-video by pressing the VIDEO or the
S-VIDEO button on the remote control.
Before using these buttons, correct input source should
be selected through menu operation as described below.
Menu Operation
Press the MENU button to display the On-Screen
1
and then press the Point
2
press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
then press the Point
items
and then press the SELECT button.
When the input source is coming from video
S-video
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a S-video-VGA cable, select S-video.
When the Input Search function is set to
On 1 or On 2 in the Auto setup function, the
input signal will be searched automatically
(p.45).
36
or the SELECT button.
Video and then
Computer 1. And
to access the submenu
S-video
Video
S-video
Computer
select S-video.
1
Video
S-video