Sanyo PLC-XK2200 Owner's Manual page 31

To reset the adjusted data, select
SELECT button. A confirmation box appears and then
select . All adjustments will return to their previous
figures.
To clear the stored data, select
highlight to the Mode that you want to clear and then
press the SELECT button.
Store
To store the adjusted data, select Store and then press
to one of the Modes 1 to 10 in which you want to store,
and then press the SELECT button.
•
selected in the PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
and press the
and then
cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
Values of
Vertical,
area V.
Store
Press MENU
button to close this
dialog box.
This Mode has stored
parameters.
, ,
, and
Vacant
Press SELECT
button to store the
data.
31