Stitch Selection; Patch Work - Silvercrest SNM 33 A1 Instruction Manual

1

Stitch selection

Triple straight stitch: (1)
For hardwearing seams.
The machine sews two stitches forwards and
one stitch backwards. This gives triple
reinforcement.
Triple zig-zag: (2)
For hardwearing seams, hems and
decorative seams.
Triple zig-zag is suitable for firm fabrics like
denim, corduroy, etc.
2

Patch work

To join two pieces of fabric while leaving a
space between their edges.
- Fold over the edges of the two pieces of
fabric for the hem and baste the edges to a
thin piece of paper leaving a small space
between them.
- Stitch along the edge, pulling both threads
slightly when beginning to sew.
- Use thicker than normal threads for sewing.
- After sewing, remove the basting and the
paper. Finish by tying knots on the reverse
side at the beginning and the end of the
seams.
16
Silver Crest SNM 33 A1
Stitch Stitch width Stitch length
A 2.5
Stitch Stitch width Stitch length
B 3~5
Stitch Stitch width Stitch length
F 3~5
S1, S2
S1, S2
S1