Table of Contents
Advertisement
TROUBLESHOOTING
POSSIBLE PROBLEM
Machine won't start
Machine beeps during
the cooking process
Water is found on
the counter under
the machine
16
EASy SOLUTION
1.
Be sure the unit is plugged in and the outlet is working.
2.
You should feel/hear a slight click when you depress the
On/Off button. If you do not, reposition your finger and
press/hold again.
3.
Make certain to press and hold the On/Off button for 3
seconds. If the unit fails to start after that time, reposition
your finger and press/hold again.
1.
The machine should beep:
•
To signal that it has preheated to its set target
cooking temperature.
•
To signal that it has regained its set target after cool food
pouches, ice, or additional water have been put into the
water bath.
•
To signal the completion of a pre-set cooking time.
2. The machine should not beep during the cooking process
if it is at the desired/set cooking temperature. If it does:
•
Check to be sure cooking pouches have not settled to
the bottom, occluding the holes of the perforated bottom
grill or impeding circulation around the perimeter of the
water bath. If this has occurred, use the pouch rack and
reposition the pouches to open the circulation.
•
Check to be sure that there is sufficient water in the
machine, i.e., that the water level reaches the FILL line on
the interior wall of the water bath.
Water can accumulate inside the lid (especially when using
the machine at temperatures above 175˚F/80°C or for
extended periods) and may, on occasion, overflow the lip of
the unit and run onto the counter.
1.
Check the sides of the machine housing for evidence of
wetness, indicating that water has trickled down the sides
and pooled there. If so, remove the lid periodically during
higher temperature or prolonged cooking, and allow the
accumulated water to flow back into the bath.
2.
If you see no evidence that water has dripped down the
outside of the machine, turn off the machine, unplug the
unit, move it and wipe up the spill. Make sure everything
is dry and turn the machine back on, resetting the desired
temperature. If the water re-appears beneath the machine,
there could be a gasket leak. Turn off the machine, unplug
it, and contact customer service.
Hide quick links:
Advertisement
Table of Contents
