General Information; Installation - Viking 30" Installation Manual

General Information

Electrical Requirement
CAUTION
Normal grounded household current,
BURN HAZARD
120 volts, 60 Hz, 15 amps, single phase.
The use of cabinets for storage above the
Electrical installation should comply with
appliance may result in a potential burn
national and local codes.
hazard. Combustible items may ignite,
metallic items may become hot and Air Supply and Ventilation
cause burns. If a cabinet storage is to be
Means must be provided for any heavy-duty
provided the risk can be reduced by
cooking appliance to exhaust combustion
installing a range hood that projects
waste product to the outside of the building.
horizontally a minimum of 5" (12.7 cm)
It is recommended that the cooktop be set
beyond the bottom of the cabinets. under a powered, vented exhaust hood, or
non-vented recirculating hood. Nothing
should obstruct the flow of combustion and
ventilation air.
WARNING
Gas Manifold Pressure
This appliance shall not be used for
Natural gas – 5.0" W.C.P.
space heating. This information is based
LP/Propane – 10.0" W.C.P.
on safety considerations.
Flexible Connections
If the unit is to be installed with flexible
• All openings in the wall behind the couplings and/or quick disconnect fittings,
appliance and in the floor under the the installer must use a flexible connector of
appliance shall be sealed. at least 1/2" I.D. (1.3 cm) NPT with suitable
strain reliefs and comply with ANSI Z21.41
• Keep appliance area clear and free from and Z21.69 standards.
combustible materials, gasoline, and other
flammable vapors.
• DO NOT obstruct the flow of combustion
and ventilation air.
• Disconnect the electrical supply to the
appliance before servicing.
When removing cooktop for cleaning and/or
service:
• Shut off gas at main supply
• Disconnect AC power supply
• Disconnect gas line to the inlet pipe.
• Lift appliance out of cabinet cutout.
14

Installation

15