Audio Connections - D-Link DSM-520 Install Manual

Audio Connections

By default the DSM-520 is set to composite audio output. The AUDIO OUT button
on the remote control toggles between the composite audio output and the optical
digital audio output (optical/coaxial).
Select one of three ways to connect audio to your DSM-520:
• Composite Audio
Plug the supplied red and white
connectors into the AUDIO
(color-coded matching) jacks on
the DSM-520.
Plug the opposite ends to the
matching jacks on your television
or audio/video system.
• Optical Digital Audio
Connect an optical audio
connector into the OPTICAL
connector on the DSM-520 and
the matching opposite end of the
cable to the audio input of your
audio system.
Note: This cable is not supplied.
• Coaxial Digital Audio
Connect a coaxial digital audio
connector into the COAX
connector on the DSM-520
and the matching opposite end
of the cable to the audio input
of your audio system.
Note: This cable is not supplied.
Connecting the DSM-520
13