Section - Installation
Select one of two ways to connect audio to your DSM-510:
Plug the supplied 3.5mm mini-jack connector into the DSM-510. Plug the opposite end
•
(the yellow video cable and the red and white audio cables) into your television/receiver
input.
Connect an optical audio connector into the S/PDIF connector on the DSM-510 and the
•
matching opposite end of the cable to the audio input of your audio system.
Note: This cable is not supplied.
D-Link DSM-510 User Manual
Audio Connections
Composite Audio/Video Connector
Optical Digital Audio
1