Audio Connections - D-Link DSM-510 Quick Install Manual

Audio Connections

Select one of two ways to connect audio to your DSM-510:
Composite Audio/Video Connector
• Plug the supplied 3.5mm mini-jack
connector into the DSM-510. Plug the
opposite end (the yellow video cable
and the red and white audio cables)
into your television/receiver input.
Optical Digital Audio
• Connect an optical audio connector into
the S/PDIF connector on the DSM-510
and the matching opposite end of the
cable to the audio input of your audio
system.
Note: This cable is not supplied.
D-Link DSM-510 Quick Install Guide 10