Table of Contents
Advertisement
Using System Diagnostics
System Diagnostics allows you to run diagnostic tests to determine if the Slate hardware is
functioning properly. Depending on your Slate model, the following diagnostic tests may be available
in System Diagnostics:
●
Hard disk test—This test analyzes the physical condition of the drive, and then checks all data in
every sector of the drive. If the test detects a damaged sector, it attempts to move the data to a
good sector.
●
Memory test—This test analyzes the physical condition of the memory modules. If it reports an
error, replace the memory modules immediately.
You can also view system information and error logs in the System Diagnostics window.
NOTE:
An external keyboard (purchased separately) may be connected to the USB port to perform
these steps.
To start System Diagnostics:
1.
Turn on or restart the Slate. While the "Press the (-) key for Startup Menu" message is displayed
in the lower-left corner of the screen, press the Volume down button (-) repeatedly. When the
Startup Menu is displayed, press the Volume down button (-).
2.
Tap the diagnostic test you want to run, and then follow the on-screen instructions.
NOTE:
If you need to stop a diagnostics test while it is running, press
esc
on an external keyboard.
Using System Diagnostics
69
Advertisement
Table of Contents
