System Configuration Menu - HP Slate User Manual

System Configuration menu

Select
Language
USB rear-facing camera
Power-on when AC is detected
Initiate orderly shutdown when AC is removed
USB Legacy
Boot Options
68 Chapter 11 Setup Utility (BIOS) and System Diagnostics
To do this
Change the display language for BIOS Setup.
Enable or disable rear-facing camera.
Enable or disable the Slate to turn on automatically when connected to
AC power.
Enable or disable the Slate to automatically initiate an orderly shutdown
when AC power is disconnected.
CAUTION: If this option is enabled, data loss could occur when AC
power is disconnected.
Enable or disable a USB keyboard, disk, or drive to be used in BIOS
Setup.
●
POST HotKey Delay—Select 0, 5, 10, 15, or 20 seconds to allow
more time to press a hotkey to enter BIOS Setup when the Slate
restarts.
●
Boot Order options —Select the order in which the Slate searches
for a boot disk.