Hub Power Light Behavior; Over-The-Air (Ota) Update; Preparing The Usb Flash Drive; Performing The Ota Update From The Additional System Updates Menu - HP Engage One Prime Maintenance And Service Manual

Table of Contents

Advertisement

Hub power light behavior

When connected to the computer, the hub power light functions as follows:
On (S0): Computer light is on. Hub power light is on
Off (S5): Computer is off. Hub power light is off.
Blinking (fades in for three seconds, fades out for three seconds): Computer and hub are in the Sleep
(S3) state.
When not connected to the computer, the hub power light functions as follows:
On for 15 seconds, then blinking (fades in for three seconds, fades out for three seconds): Computer
removed.
On for 15 seconds, then blinking (fades in for three seconds, fades out for three seconds): AC adapter
connected, computer not connected.
Hub power light error blinking functions as follows:
Blinking (one for one second, off or one second): Insufficient AC adapter (less than 120 W) connected.
Blinking (one for one second, off or one second): Overpowered AC adapter connected.
For more information about the computer power button light location, see
For more information about the hub power light location, see

Over-the-air (OTA) update

Preparing the USB flash drive

Performing an OTA update requires a 2 GB or larger USB flash drive. You must format the drive using the
FAT32 file system.
To prepare the USB flash drive:
1.
Insert the USB flash drive containing the OTA package into a Windows® computer.
2.
Open File Explorer.
3.
Right-click the USB drive in the navigation panel.
4.
Select Format.
5.
Under Capacity verify that the USB flash drive capacity is at least 2 GB.
6.
Under File system select FAT32.
7.
Copy the OTA package to the root of the USB drive.

Performing the OTA update from the Additional System Updates menu

1.
Insert the USB flash drive containing the OTA package into the Android device.
2.
Confirm that the USB drive is recognized in the Files app on the Android device.
3.
Tap Settings, and then tap Additional System Updates.
4.
Tap the upgrade package, and then tap Install.
10
Chapter 2 Using and updating the computer
Bezel components on page
Optional hub components on page
2.
3.

Advertisement

Table of Contents
loading

Table of Contents