C
Connections
)
Section
C
)
C!D
~Important
•
Use th is unit in other than the followi ng cond i-
tions could result in fire or malfunction.
-
Vehicles with a 12-volt battery and negative
grounding.
• To prevent short-circuit, overheating or mal-
function, be sure to follow the directions
below.
-
Disconnect the negative terminal of the
battery before installation.
-
Secure the wiring with cable clamps or ad-
hesive tape. To protect the wiring, wrap ad-
hesive tape arou nd them where they lie
agai nst metal parts.
-
Place all cables away from moving parts,
such as gear shift and seat rails.
-
Place all cables away from hot places,
such as near the heater outlet.
-
Do not pass the yellow cable through a
hole into the engine compartment to con-
nect to a battery.
-
Do not shorten any cables.
-
Never cut the insulation of the power cable
of this unit in order to share the power to
other equipment. Current capacity of the
cable is limited.
-
Use a fuse of the rating prescribed.
•
IP-BUS connectors are color-coded. Be sure
to connect connectors of the same color.
•
Place antenna cable as far away as possible
from the other cables to prevent noise.
•
Black cable is ground. This cable and other
product's ground cable (especially, high-cur-
rent products such as power amp) must be
wired separately. Otherwise, fire or malfunc-
tion may result if they are accidentally de-
tached.
•
Do not connect anything other than the USB
portable audio player/USB memory.
•
Plug the terminal of the USB portable audio
player/USB memory firmly into the connector
to connect, otherwise this unit may not work
properly or an error may be displayed on the
head unit.
En
®