C
Installation
)
- - - - .
- - - - - - - -
Section
C
)
G1
~Important
•
Check all connections and systems before
final installation.
•
Do not use unauthorized parts. The use of un-
authorized parts may cause malfunctions.
•
Consult with your dealer if installation re-
quires drilling of holes or other modifications
of the vehicle.
•
Do not install this unit where:
-
it may interfere with operation of the veh i-
cle.
-
it may cause injury to a passenger as a re-
su It of a sudden stop.
•
When mounting this unit, make sure none of
the leads are trapped between this unit and
the su rrou nd ing metalwork or fitti ngs.
•
Do not mount this unit near the heater outlet,
where it wou Id be affected by heat, or near the
doors, where rainwater might splash onto it.
•
Before drilling any mounting holes always
check beh
i
nd where you want to dri II the
holes. Do not drill into the gas line, brake line,
electrical wiring or other important parts.
•
If this unit installed in the passenger compart-
ment, anchor it secu rely so it does not break
free while the vehicle is moving, and cause in-
jury or an accident.
•
If th is unit is installed under a front seat,
make su re it does not obstruct seat move-
ment. Route all leads and cords carefu Ily
around the sliding mechanism so they do not
caught or pinched in the mechanism and
cause a short-circuit.
Installing this unit
Mounting with Velcro fasteners
Thoroughly wipe off the surface before affixing
the Velcro fasteners.
•
If the Velcro fasteners (hard) adhere to the
car mat directly, you may install this unit
without usi ng the Velcro fasteners (soft).
•
Mount this unit using the Velcro fasten-
ers.
Car mat or chassis
En
GD