Supermicro SUPERSERVER 6016T-URF4+ User Manual page 69

UIO Power Connector
A Universal I/O (UIO) power connec-
tor is located next to the UID button.
Connect this connector to the power
supply to provide adequate power to
the UIO device installed on the slot for
this device to function properly.
NIC3/NIC4 LED Headers
A LAN3 (NIC3) LED and LAN4 (NIC4)
LED header is located at JPK1. Con-
nect the appropriate cables here to
provide LAN3 and LAN4 LED indica-
tions on your motherboard.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR1. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
Chapter 5: Advanced Serverboard Setup
Universal I/O Power
Pin Defi nitions
Pins# Defi nition
B1 +5V
B2 +5V
B3 +5V
B4 +5V
B5 +5V
B6 +5V
B7 +5V
B8 +5V
B9 +5V
B10 +5V
B11 -12V
Key
B12 +3.3VSb
B13 +3.3VSb
B14 GND
B15 GND
B16 GND
B17 GND
B18 GND
Wake-On-Ring
Pin Defi nitions
Pin#
1
2
5-21
Pin # Defi nition
A1 +3.3V
A2 +3.3V
A3 +3.3V
A4 +3.3V
A5 +3.3V
A6 +3.3V
A7 +3.3V
A8 +3.3V
A9 +3.3V
A10 +3.3V
A11 +3.3V
Key
A12 +3.3V
A13 +12V
A14 +12V
A15 +12V
A16 +12V
A17 +12V
A 18 GND
Defi nition
Ground (Black)
Wake-up