Operating On Hills - Husqvarna Z4219 Operator's Manual

Turning on the spot can be achieved by
moving one control backward (behind
the neutral position) and carefully moving
the other steering control forward from its
neutral position.

Operating on hills

Read the Safety Instructions "Driving on
Slopes" in the "Safety Instructions".
WARNING!
Do not drive up or down hills
with slopes greater than
10 degrees. And do not drive
across any slopes.
• The slowest speed possible should be
used before starting up or down hills.
• Avoid stopping or changing speed on
hills.
• If stopping is absolutely necessary, pull
drive levers into the neutral position and
push to the outside of the unit and
engage the parking brake.
IMPORTANT INFORMATION
Control levers return to neutral when
released. This may cause the mower to
suddenly stop.
• To restart movement, release the parking
brake.
• Pull the control levers back to the center
of the mower and press forward to regain
forward motion.
• Make all turns slowly.
30
English-
OPERATION
Stopping conditions
Released parking brake
8011-755
8011-481