Husqvarna Z4219 Operator's Manual page 29

8. Press in and turn the ignition key to the
start position.
9. When the engine starts, immediately
release the ignition key back to the run
position.
IMPORTANT INFORMATION
Do not run the starter for more than
5 seconds each time. If the engine does
not start, wait about 10 seconds before
re-trying.
10. Set the desired engine speed with the
throttle.
Allow the engine to run at a moderate
speed, "half throttle", for 3-5 minutes before
loading it too heavily.
USE FULL THROTTLE WHEN MOWING
(no choke).
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is an odorless,
colorless, poisonous gas. Do
not use the machine in
enclosed spaces.
OPERATION
Turn to the start position
Return to run position
Set the engine speed
8011-742
8011-743
8011-754
27
English-