1.18 User Exposure-Adjustment Mode
This mode allows the user to perform some of the exposure adjustment modes if he desires to do so.
The user can adjust the following three modes:
• Manual exposure 100% (05 mode, code 1)
• Auto exposure 100% (05 mode, code 5)
• Photo exposure 100% (05 mode, code 14)
A. Auto exposure adjustment (AJ5)
(1) Press the auto-exposure key to make the auto-exposure LED to
come on.
(2) While pressing the auto-exposure key, press the ZOOM UP (or
ZOOM DOWN) key, and the light MAX (or dark MAX) LED flashes.
(3) Each time the light MAX (or dark MAX) LED flashes, the AJ value
is increased (or decreased) by 2.
(4) When you release one of the keys you pressed simultaneously,
the display goes back to step (1), completing the adjustment.
B. Manual exposure adjustment 100% (AJ1)
(1) Press the auto-exposure key to make the center LED of the manual
exposure to come on.
(2) Steps (2)–(4) are same as for the auto exposure adjustment.
1550 ADJUSTMENT
1 - 42
ON
ON
Flashing
ON
ON
ON
Flashing
ON
Oct. 1995 © TOSHIBA CORP.