Toshiba 1550 Service Handbook page 42

Notes
• There is no need to do this for machines which do not use B5-sized paper.
• There is no need to do this for machines which are equipped with a PFU.
2. Check the copy for any image void and if there is
any, reduce the new value likes "15"
until no image void occurs. Check for no paper
misfeeding with the new value.
1.16.3 Lead edge adjustment
Since incorrect lead-edge position can also occur due to paper quality, feed roller surface condition,
etc, first check these itmes before starting adjustment.
Note: The lead edge position of each paper source can be adjusted independently. However, if adjustment for
bypass feeding is necessary, make adjustment in order of the cassette
Cassette
100% 200%
(53) (54)
<Procedure> (Use the appropriate codes in the "05" test mode.)
Example: Adjustment for the cassette (100%)
1. 0 5
AJ
Power
2.
5 3
PRINT
Oct. 1995 © TOSHIBA CORP. July 1996
"14"
Bypass
50%
100%
(55)
(56)
ENERGY SAVER
(Example)
11
"13" ...
Voiding
PFU cassette
Test copy for checking
the lead edge position
1 - 39 ®
bypass.
100%
(57)
1550 ADJUSTMENT