Using The Hdmi Control Feature - Yamaha YSP-4000 Owner's Manual

Using the HDMI control feature
You can operate the following functions using the remote control supplied with your TV if this unit and an HOMI
control-compatible TV (except some models) are connected via HOM!.
• Turning on or off the power (synchronized operation with the TV)
• Selecting the audio output component (TV or this unit)
• Adjusting the volume level (up/down and mute)
An example of the HOMI control-compatible component is a Panasonic EZ Sync (for U.S.A. and Canada) or Viera Link
(for other countries)-compatible component (TV, OVO recorder, Blu-ray recorder, etc.).
.:\4<~
If you connect this unit to an HDMI control-compatible DVD player or Blu-ray Disc player via HDMI, you can also control the
connected component in synchronization with this unit (except some models).
1
Connect this unit to your HOMI control-compatible TV via HOMI.
For details about HOMI and HOMI components, see "Information on HOMFM" on page 21 and "Connections using
HOMI cables" on page 22. Also in the owner's manual supplied with your TV, refer to the information on
connecting an AV amplifier.
2
Turn on the power of all components connected via HOMI.
For details about controlling external components, see the owner's manuals supplied with your components.
3
Check the system settings for all components connected via HOMI and activate the HOMI control
feature.
For details about setting external components, see the owner's manuals supplied with your components. Once you
have followed steps I to 3, you do not need to carry out the same procedure again next time.
4
Turn off the power of your TV and then turn on the power again.
5
Set the input source selector of your TV to this unit (HOMI, etc.).
6
Select the connected component as the input source by pressing INPUT on the front panel of this
unit (or press one of the input selector buttons on the remote control). Confirm that the video
image played back on the OVO recorder (etc.) appears in your TV correctly.
7
Use the remote control supplied with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
. ' J
Notes!
• Check the following if you cannot operate this unit in synchronization with your TV.
- Whether HDMI CONTROL is set to ON (see page 87).
- Whether the HDMI control feature is activated for your TV (see the owner's manual supplied with your TV).
• While you are playing back audio from a non-HDMI component, turning off the power of your TV with the remote control
supplied with your TV does not turn off the power of this unit. Playback continues without being affected.
75
En
•