Using The Tv Macro; Setting Macros For The Tv With The Tuning Capability - Yamaha YSP-4000 Owner's Manual

Using th~;T,!macr~
•
Remote control features
Setting macros for the TV with the
tuning capability
4
Press TV INPUT repeatedly until the screen
changes to the display of the input source
selected in step 1.
MACRO
~
or
TV INPUT
Cij
While holding
down, press
While holding
down, press
CH
5\
GX
-'.
"
......
TV MUTE
LDESE~
Press ENTER to confirm the macro setting.
Press MACRO while holding down CODE
SET.
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
LDESE~
5
3
Press CH +/- or the numeric buttons to select
the TV channel.
Check that the TV screen changes to the tuner screen.
2
1
• Be sure to set up a remote control code for your TV before
setting macros.
• The ways to set macros differ if your TV does not have the
tuning capability.
• If you press any control buttons on the remote control other than
the ones used to set macros while setting macros, the setting
procedure is automatically canceled.
• If it takes more than 10 seconds in steps 2 and 3, the setting
procedure is automatically canceled. In this case, repeat from
step I.
The TV macro feature makes it possible to perfonn a
series of operations with the press of a single button. For
example, when you want to playa DVD, you would
nonnally tum on the component, select DVD as the input
source, and press the play button to start playback. The TV
macro feature lets you perfonn all of these operations
simply by pressing the DVD macro button.
Not".i
(U.S.A. and Canada models)
•
107
En