Setting The Max Volume; Setting The Turn On Volume - Yamaha YSP-4000 Owner's Manual

Adjusting the system parameters
setili1g;ifle'itfAj,voLllMEt~'~IJ'!~;L,;:?},,~'~';1
'. " " ' , .• , , , , , , " ' , . • ' '<c" J . ' , " . c" , , ,
J
You can set the maximum volume level so that this unit
will not output sound beyond the limited volume level.
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 94.
2
Set the operation mode selector to YSP.
3
Press
z:::,. /
'V
so that "MAX VOLUME SET" is
displayed in the front panel display.
+
5
Press
<1/
t>
to adjust the maximum volume
level.
Control range: MAX, 99 to 01, MIN
Control step: I
6
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
STANDBY/ON
~
The new setting for the maximum volume level will
be activated when you tum on the power of this unit
next time.
You can set the initial volume level when the power of this
unit is turned on.
"1 -
I I
I'
H,:':,
'.,./OLUNE
SET
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 94.
4
Press ENTER.
96
En
2
Set the operation mode selector to YSP.