On-Screen Service Menu System - Sanyo LCD-32XH4 Service Manual

On-screen Service Menu System

General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
How to enter the Service Menu
1.
Press and hold the MENU button on Side Controls.
2.
Keep pressing the MENU button and press the NUMERIC "1" button on the remote control, and the service mode
menu will be displayed.
Side Controls
MENU button
Open or close the On-Screen Menu.
[ Service Mode Menu ]
Service Mode
Source
Properties:
Data:
How to select the service item and adjust data:
To adjust data:
1) Select "DATA" line by pressing
Service Mode
Source
Properties:
Data:
2) Press + or - button to adjust data.
To exit service mode
1. Press MENU button on the Side Controls or remote control.
2. Turn the TV off by pressing the POWER ON/OFF button on the Side Controls or remote control.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
V1.29070612un42
All
NormalRed
88
Data Value
or button.
V1.29070612un42
All
NormalRed
88
-12- -12-
VIDEO MODE
RECALL DISPLAY MUTE AUDIO MODE
Version No.
ECO
Input Source
VIDEO MODE
Item Name
IMAGE
RECALL DISPLAY MUTE AUDIO MODE
ZOOM SURROUND
ECO
IMAGE
ZOOM SURROUND
POWER
SLEEP
PIP CHANGE MAIN/SUB
POWER
BACK
CH
CH
SLEEP
BASS SOUND
PIP CHANGE MAIN/SUB
BACK
CH
CH
BASS SOUND