Printer Control Panel; Cancel Button; Rotate Toner Button - Konica Minolta magicolor 2400W Technical Manual

Printer control panel

Printer Control Panel
The magicolor 2400W has six LEDs (Ready, Error, Y, M, C, and K) that
indicate printer and consumable status.
Ready Error
Off Off
On Off
On On
Rapid Blinking Off
Blinking Off
Slow Blinking Off
On Slow Blinking
On Blinking
On Rapid Blinking Rapid Blinking Not a KONICA MINOLTA
— —
— —
— —

Cancel Button

Press and hold the Cancel button for more than 5 seconds to cancel the
current job. Press the Cancel button for less than 5 seconds to continue
a print job after loading media or addressing an error message, to print
the back of the page during manual duplex printing, or to reset the
printer after replacing a toner cartridge,
If the printer has a demo page chip installed (retail merchandised units
only), press and hold the Cancel button for less than 5 seconds to print
a demo page.

Rotate Toner Button

Press the Rotate Toner button once to move the cyan toner cartridge
into position for replacement. With each additional press of the button,
the black, yellow, and then magenta toner cartridge move into position,
so that they can be replaced.
19
Toner Condition
— Power off
— Ready to print
— Initializing/Canceling a
job
— Warming up/Calibrating
— Processing data/
Printing
— Energy Saver mode
— Drum cartridge near
end of life
— Drum cartridge end of
life
toner cartridge
Slow Blinking Toner cartridge near
empty
On Toner cartridge empty
Rapid Blinking Toner cartridge is ready
to be replaced