Using The Built-In Flash - Nikon D90 User Manual

Using the Built-in Flash
The camera supports a variety of flash modes for photographing poorly lit or backlit
subjects.
II Using the Built-in Flash:
A~,
2",
~,
and
~
Modes
1
Choose a shooting mode.
Rotate the mode dial to select the desired mode.
101
2
Choose a flash mode.
Press the
~
button and rotate until the desired flash mode is displayed in the
control panel (pg. 71 ).
.........................
3
Take pictures.
The flash will pop up as required when the
shutter-release button is pressed halfway, and
fire when a photograph is taken.
Press the
~
button to raise the flash.
II Using the Built-in Flash:
P, S, A, and MModes
1
Choose a shooting mode.
Rotate the mode dial to select the desired mode.
2
Raise the flash.
3
Choose a flash mode.
Press the
~
button and rotate until the desired flash mode is displayed in the
control panel (pg. 71).
....................................................................................................................................................................................................................................................................................
4
Select a metering method and set exposure.
S
Take pictures.
The flash will fire whenever a picture is taken.
70