Asus UP-895MD Series User Manual page 73

• The plugged USB 3.0 device may run on xHCI mode or EHCI mode, depending on the
operating system's setting.
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
• Due to the design of the Intel
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
• Multi-VGA output supports up to three displays under Windows
displays under BIOS, and one display under DOS.
• Intel display architecture design supports the following maximum supported pixel
clocks (Pixel Clock = H total x V Total x Frame Rate (Fresh screen rate)):
- DisplayPort / Mini DisplayPort: 533 MHz
- HDMI port: 300 MHz
*Bluetooth and Wi-Fi module LED indications (Optional)
Wi-Fi LED
Status Description Status
Off No link
Green Linked
* The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such mark by ASUSTeK
Computer Inc. is under license. Other trademarks and trade names are those of their respective owners.
** LAN ports LED indications
Activity Link LED
Status Description
Off
No link
Orange
Linked
Orange (Blinking) Data activity
Orange (Blinking
Ready to wake up
then steady)
from S5 mode
You can disable the LAN controllers in BIOS. Once disabled, the LAN port's ACT/LINK LED
and SPEED LED stop blinking.
ASUS Z97-PRO Series
9 series chipset, all USB devices connected to the
®
Bluetooth LED
Description
Off No link
Blue Linked
Blinking Data activity
Speed LED
Status Description
Off 10 Mbps connection
Orange 100 Mbps connection
Green 1 Gbps connection
OS environment, two
®
Bluetooth
Wi-Fi
LED LED
Wi-Fi 802.11 a/b/g/n/ac,
Bluetooth v4.0
ACT/LINK SPEED
LED LED
LAN port
2-15